Reputación con el tiempo
Análisis de Reputación
| Evento | Recuento | Delta |
|---|---|---|
| Alguien completó tu guía | 42 | 1086 |
| Un administrador aprobó tu guía | 2 | 200 |
| A alguien le gustó tu guía | 4 | 39 |
| Publicar contenido actualizado que contiene un enlace a tu guía | 4 | 31 |
Ayuda
Ryan
Ryan
| 1,357 | Reputación |
| 2 | Soluciones |
| 14 | Guías |
| Miembro Desde 19/08/15 | |
For the replacement battery I found that the Turnigy 2000mAh 1S 1C Lipo w/ 2 Pin JST-PH worked perfectly while also being a budget option at only $2.54 USD before shipping. However ONLY INSTALL AFTER CHANGING THE POLARITY OF THE CONNECTOR, this can be done with a pin or craft knife with relative ease. After doing this the controller has doubled in battery life. It required no modification to the controllers internals only extra care to ensure the longer cables didn’t get pinched in reassembly.
with a good prying tool shouldn't break any components, i use steel guitar picks and standard plastic wedge tools to separate the parts, however glad to know this guide helped.
Did this upgrade with my T440 and worked great, used a LP140WF1 / B140HAN01 display added some much needed pixels and IPS viewing angles. I bought from Aliexpress Store: Kevin trade shop.
Yes only two need to be removed, however I initially wrote a tear down to gain access to the network card etc and the way ifix it is structured for guide creation these steps are in fact used in that longer guide. I've amended the instructions now so hopefully they are more clear now.