Reboot Gozo

Now if this was my device i would probably remember the FW PW but i bought it as a spare or repair project, screen not...

This iPhone has been dropped and has had a screen change. back camera was not touched, and was functional after drop and...

Before you go splashing anything on the phone just make sure its "at least" 99% alcohol :) if you are using surgical spirit; i think its 99% but look around the bottle just to be sure. the reason behind this is that alcohol evaporates. do not splash anything on that is not 99% alcohol or you might have a sad phone ;)

What speed are the RAM modules? Your Mac mini might not support modules you have. I would try 1333 MHz modules then see if you have any luck with them.

i am sure all you need to do is pull the battery ... hold the power button for about 20 - 30 seconds ... plug the battery back in, and hey presto !!! your laptop should be functional again :)

Tip ... for best quality screen ... PLEASE BUY FROM A REPUTABLE STORE OR SITE !!!

this is happening as it is set to demo mode ... you will need to go into setting and reset. then select normal operation. its not quite popups its Samsung propaganda ;) Good Luck

If the logic board on this phone is still intact there is hope :) how bad is it ? is the chassis all bent out of shape ? can you elaborate a bit more on the damage ? as i was saying ... if the logic board is still intact you may be able to put the logic board in a different shell. unfortunately the storage of any iPhone is a chip on the board, so you can't extract the storage and put it on an other phone. upload a couple of pics maybe i can help further iPhone logic board it looks like the logic board has been split or partially severed ... the only hope the phone had is if the logic board was "intact" which it looks like its not :( The phones DATA has in no way to do with what the sim holds "as DATA" sim: some numbers and you phone number info. Phone Memory which by the way is a crucial part of the logic board : pics, numbers apps, music. to make a long story short .... if the logic board is not intact ( as a whole, like the picture) it can't possibly be mended ;(

WOW ... There not cheap! MacBook Air 13" (2015) and MacBook Pro Retina 13" and 15" (2015) SSD and here is the guide to install it: Reemplazo del SSD del MacBook Air 13" de principios de 2015

There is no way that the SSD or HDD for that matter will cause the computer to short out ... install the SSD in the place of the original HDD, install osx, once done let the laptop restart and go through the process of setting up once you get to the point where the laptops asks you if you want to transfer from a drive or time machine, connect the original HDD and use it as your backup tyo restore the laptop to its original state but with the SSD. Also make sure that the SSD is of the same size as the HDD, as if its not you will have to transfer from the original HDD to the SSD.

All the cables are the same. There is no cable that is specific to Wattage. Are you sure it's an 85 Watt charger ?

Follow this guide: MacBook Unibody Model A1278 LVDS Display Cable Replacement This can bit of a daunting fix and will take some skill so I wish you good luck :)

this is a great guide !!! i just want to share a little trick with getting the glass off with the right temps. Heat guns are good but keep the temp no higher the the 150 to the 200 C mark max at about 3 to 6 inches away and never directly on the lcd as it might leave a patch. the iOpener is a great tool aswell. but the problem with both the heat gun and other heat type tool is that they tens not to be consistent through out, like one side is hot but the other has now gone cold. Try to find a sunny day, turn the iPad off and just leave the iPad in a window under the sunlight, it does get hot enough and not only that, the heat is uniform throughout the device so it easier to remove the glass. Good luck