northstar

Nicou posted earlier that it might be an issue with the pins. That would make me think it’s a grounding issue where the pins contact the copper strips on the back side of the motherboard. I’ll try bending them out and cleaning the copper when I open it up again. I did find a rear camera on Amazon for the P20 and hopefully will have it by Friday.

I just installed Open Camera and it is giving me the message that says “failed to open camera. Camera may be in use by another application? ID:0”

I just did an iPad Air 2 screen replacement and used the original home button assembly. When I booted the device it gave me a message that Touch ID is not functional. The button works otherwise? Is there something I need to do to reset it? Thanks

So for glass only does the battery and motherboard need to come out?

Good tip! Most times the corners are damaged.

I also recommend doing step 45 first (removing the two pieces of foam tape at the bottom).

I recommend removing these two pieces of foam tape prior to loosening and lifting the LCD.

I have broken about 10 of the 50 or so iPad minis that I have repaired. I always try to have a LCD on hand. I’ll have to try the fishing line trick!