Ok, so following the advice from @hellomacos I did the following. (1) I tried using ifix it tweezers: they were too thick and so a no go (2) I then looked for some precision tweezers on Amazon, and found these (Precision Tweezers Set, XOOL 10 PCS ESD Tweezers Set) https://a.co/d/6KvOvAA (3) I used the thinnest tweezers in the set. (4) I tried grabbing every way I could and what ended up working was to come from the top with the tweezer arms vertical, grab as far down on the SD as I could. Then lever the tweezers arms so they were placed more horizontal. (5) Then held the tweezers as far down as I could to have maximum closing strength since the card was stuck in the locked in position. (6) I then pulled and wiggled a little (no idea if wiggling helped) and the SD card came out! (7) I finished by cleaning the SD port from the SD card shreds and done! I finished putting the cover back (WITHOUT THE SD CARD) on and checked that the new SD card was locking and reading correctly in the Steam Deck (it should show...