Shai

Hi, I have iPhone 4, had a water damage, but worked fine for some weeks. Now the problem is that during a call, you can't hea...

Hi all, The summer is here, and apperantley many people are going to swim with their iPhones HAHA :-p After I cleaned iPhone ...

Hi, After water damage, cleaned all connectors with special liquid etc. Reassembled the device, and not the touch does not re...

Hi, I have 3GS, in order to use the power button, u need to press really hard, in some point, and then it works (With pinchin...

Hi, I want to disassemble ipod touch 4 generation. You need to use heat gun to open the ipod. But what about reassembly it? d...

In order to operate my home button, I need to push extremely hard. What could be causing this? Do I need a new button? Is the...

Hi, in iPhone 3GS, the power button is not response. You press it but no action. The phone felt down to the floor many times....

Hi, In this picture its the iPhone 2g without the LCD: http://img217.imageshack.us/img217/1135/... Which of the white cable(1...

Hi, The iPhone had water damage, and the LCD had no light afterwads. but the Device worked! just without light.. (Phonecalls ...

Hi, The phone dropped into a toilet. And immidiate got out, and been dried with a fan. It was 1 week ago, and phone works fin...

Take an injector, add some super glue in it. Then use it to glue the Bezel to the back cover. Make sure you do it slowly and in Maximum precision. This is the bezel if you wondered what it is :) http://cart-products.ifixit.net/cart-products/qsjpKkfwMsUP4PfP.standard

Buttom line is: Stay with your current Firmware/version and instead of SAM, pay 5$ for pushfix - see here: pushfix good luck :)

Try these: 1. Try a back USB port 2. Make sure you run the latest iTunes version. 3. kick your device out of recovery using "exit recovery" button in tinyumbrella. Download here: http://cache.firmwareumbrella.com/downlo...-5.00.00.exe 4. Enter DFU 5. Restore your custom FW

Try these: 1. Go to General > Settings > Reset and press on Reset network settings. 2. Try to connect to some other Wifi network (Friend, coffee shop etc) 3. Try to disconnect your router and connect. If non of them is working: *then try restore via iTunes to the latest 4.3.3 Firmware. *If restore doesn't work, then maybe the WIFI cable got disconnected from the board :/

Thanks!

I fixed my iPhone 3GS that got lots of water in!!!

thanks for a great guide!

I cleaned these Battery contacts, and then one of the contacts lost its GOLD color, and got some black signs :/

Is this ok?

Please see the pic:

http://img42.imageshack.us/img42/5630/im...

Hi,

you didn't show what and how to clecn the LCD.. Just put it inside the isopropyl alcohol container that we had used for the Motherboard?

Can you please tell what size of two Phillips #00 screws are these in step 1?