Hello Everyone, Appreciate if one of you can guide me to a Dyson DC50 teardown or a repair guide… I found a couple of...

Hello, While cleaning my fan (Homedics AR-NC01GY Breathe Air Cleaner With Nano Coil) I broke one of the 4 fans it comes...

Greetings, I bought a blueant S4 Bluetooth device and trying to install it in my helmet. Before I tear it down, wanted to...

I am not sure what is wrong with my G1 Phone, It doest charge when I connect it to the power. Based on my research, I have...

There is a simple solution to this… I had this problem and the Dyson support had the answers. Refer to the link below https://www.dyson.com/support/journey/gu...-01?machineId=209456-01

Hello Brittney, In the above comment you mentioned that you have a manual focus option and the shot is out of focus... They adjusting the shot using the focusing ring manually (in manual focus mode). When the shot looks clear through the view finder, take the shot. Let us know if it is focused properly. I am sure you must know how to determine if the shot is in focus... Incase if you don't: when adjusting manually, when the subject is in focus, while looking through the view finder a green light glows on the bottom left corner of the view finder, indicating that the subject is in focus... Take the shot, check if it is in focus... If every thing works well, and the above shot is in focus, then the possible problems are with the lens (if it has an inbuilt focus motor). D40 lacks an inbuilt focus motor... So camera shouldn't be a problem. (or) problem with the camera and lens contacts... Remove the lens and clean the contact points on the lens and do the same on the camera as well. --Adit

Want to rule out the possibility that basics needed we being done. 1. Press and hold the shutter button halfway for about a second or two before pressing completely. When the camera focuses, the camera will beep twice and a green indicator lights on. Also a green box appears on the LCD of the camera. Please let me know if this works.

Greetings Dan, Walter, Firstly Thanks for the help. I appreciate the answers. Funny things is, this is my second time that I am responding. I don't know my my responses are not posted here. Well, my previous response was as follows, Dan, Thanks for the response. Yes, I have tried charging it with my battery out, I have tried with different wall chargers at different wall point, I have also used the computer cord to charge it. It doesn't respond. No sign of life. As Walter mentioned below, it could be the problem with mini USB port on the phone. Walter, Thanks for the response. As mentioned above, I have tried a few things and finally zeroed on mini USB port. My question: How my battery gets charged? Based on the Schematics, Mini USB daughter board is connected to Motherboard and the battery is charged through the contacts on Motherboard. How do I find out which is faulty, Is it only by ordering new parts? My Second Question: If ordering parts is the only solution I have for my first question then, where do...