You either have a software problem or a defective OLED panel. First, try to flash a new copy of either stock or custom software. If that doesn’t solve the problem, then replace the display.
You’re right there. This is a software issue. There are other reports of this happening with version 6.7.8. Apple recommends a reset. However, this often does not work. https://discussions.apple.com/thread/250... I probably would get new earbuds, but probably NOT Airpods. There is no software upgrades available, and who knows if Apple will do this in the future to their later models.
If your JBL Flip 4 is making buzzing, crackling, or distorted noises, see the JBL Flip 4 Makes Crackling Noise problem page for possible problems and solutions. Two words - dead driver. The unit will require a teardown and some soldering. Guide at: Sustitución del altavoz delantero del JBL Flip 4
What phone do you have? I do know that there are some models by LG where it is impossible to even reset it. By the way, if you enabled USB debugging before you locked your device, there are some PC tools that can help you.
The problems could be large. There would be nothing holding the home button in place. Also, there could be permanent damage to the home button, connector, or your display. If the button breaks, you will never get Touch ID again. You should get a new cover. You can find them all over the internet.
What type of J2 is it? There is the Core, Prime, Pro, and etc. models. You can find them on sites like eBay, Amazon, etc. However, be careful! Certain sellers may try to sell you a fake or low quality display.