Mis Guías Favoritas
Página 1 de 2
Error: Cannot Initialize 8FBrand new printer, just arrived today. It says "Cannot Initialize 8F". After looking around that generally means some kind of...
Printer won't boot; beeps while flashing blue LED three times.The yellow ink didn't work, so I took apart the print head to flush it out. I put it all back together and it was running the...
Responder a:Error: Cannot Initialize 8FHa! After getting impatient and frustrated i began poking about the inside the printer and found a belt that wasn't on a cog! When you lift the scanner lid, in the back-left corner of the machine there is a white gear that is attached to a main horizontal roller. The belt was sitting NEXT to that gear, rather than on it. I was able to push the belt back on with my finger without removing any panels. Once i did this, i held the red "x" on the panel again and the print head moved to the middle as it should. Everything appears to be working now.