You are talking about the Pxx conector in the 3DS XL that retains the flex cable coming from the touch screen. For the 3DS XL is has four differents : P10, P12, P13, and P17. You can find it in ebay and some other on-line stores. https://www.aliexpress.com/item/10pcs-Touch-Screen-Ribbon-Port-Socket-For-3DS-XL-Repair-4-Pin-Connector-P17-P12-P13/32762921830.html?spm=2114.40010308.4... My advice buy at least 10 if having a regular solder and good soldering skills, because is quite easy to damage it. Ideal fix is done with a microscope, heat station, and a lot of good flux. Fixable but not easy. Good luck, Juan

Eric, If any of the following components is damage it will not turn on: broken lcd, loose or damaged wifi, camera flex broken, water or humidity in motherboard, any other short circuit. You will need good working parts to replace one at the time and discard. Good luck. Eric, Si cualquierd de los siguientes componentes esta danado el DS no encedera: Pantalla rota, tarjeta wifi rota o floja, cable felx de la camara rota, agua o humedad en el motherboard, cualquier otro corto circuito. Buena suerte. Juan

The EM10 power supply filter on the motherboard may be faulty. Check this picture from one of the ifixit guides. Reparar una DS Lite que no carga I could not see the white residue in your pictures but that could means some humidity in the motherboard. Check and let us know results. Regards, Juan

Definitively the main cause for this error is the wifi card: - Reason 1: Wifi card is loose > You will need to put it back in place - Reason 2: Wifi card is damage > Only way to fix it is to replace with a new one. This issue is not related to R4 flash cards, firmware or updates. Regards, Juan

Two possible causes for a black screen: - Wifi card is loose and needs to be put back in place. - LCD screen flex is detached or broken. If detached you will need to reattach it. If having a broken flex you will need a new replacement screen. Regards, Juan

If you placed the battery with wrong polarity you blow one the power line fuses (F1 or F2). Just replace it and it will be 100% functional. Regards, Juan

Apologies for the late reply. It was no short at all, the replaced LCD was damaged. I try a new one and all ok. Regards, JM

Hi Raoul, I am in a similar situation with a Gamepad, however in my case is quite different. I replaced the LCD and touch screen and getting response from the touch screen and sounds. In my case seems to be video related issues, in your case I recommend you to verify the wifi/bluetooth cards. If any of those are not properly seated or damaged the remote will not power on. Regards, JM Good luck and good repair.

Hi, Make a visual inspection and look for any sign of humidity in the motherboard. Some times it will be more expensive the labor of investing more than 2 hours looking for the root cause than the repair itself. My advice, whole cleaning of the motherboard and if possible ultrasonic treatment to remove any sulfation in the components. If required apply a good flux and heat (heath gun mid power) 2.5 mins p/side. Good luck and good repair. JM

Hi, I have not seen any schematics available in the web. It will be advisable to buy a broken one and remove from one motherboard to the broken one. Nintendo is quite close releasing any schematic. Good luck and good repair. JM