Ayuda
Menú
Tus configuraciones
Media vez obtengan, podras ver un gráfico de la reputación que han obtenido con el tiempo.
Aquí está una vista previa de cómo lucirá el gráfico:
Evento | Contar | Delta |
---|---|---|
El mensaje fue votado positivamente | 3 | 36 |
Respuesta aceptada | 1 | 30 |
Tu comentario eliminado debido a las marcas | 1 | -100 |
Are you sure your watching the right instructions for the model you own? If 2 wires, and the right battery was bought, then it also should have 2 wires. IF 3 wires on the battery, perhaps the wrong model battery was ordered for your device. Watching a teardown video just now, this “ JBL Clip 2” has 3 wires. It is always a possibility that JBL used a version 1 and version 2 battery / motherboard in the JBL Clip 2’s.. you would be the one to determine that.
There should be sticky glue holding down wires and sealing up openings. Take care when you need to remove this glue.
When pulling out the connector, be careful of the small parts on the motherboard.
Careful of the O-Ring.
You might have to pick the hot glue out the screw heads.
Careful not to break the grill pins as they are sticky glued into place.