Respuesta a "I dropped my speaker, and it wont charge or turn on!"If its fairly new, and you have proof of purchase, you might be able to get JBL to warrantee it. Don't expect speed out of them though..
Respuesta a "Won't charge or power on"The JBL Pulse 2 USB fails all the time. JBL makes warrantee work quite difficult to get. Heres how I fixed the USB port. 1. Remove rubber ring on the bottom . Warm it up with a hair dryer or heat gun, its hot glued on. 2. Unscrew the four silver screws you find under the rubber, remove the vanity ring. 3. Unscrew the four black screws you rind under the vanity ring. Gently pry between the grate and this part and loosen this structural part. Its attached to the rubber strip that has all the buttons, so your just going to bend it back. 4, warm up the black diaphram with the JBL logo in the middle and peel it off carefully.. Again. hot glued. 5. Locate the plug in the middle (white) with one red and one black wire attached. Labeled "GND VUSB" 6. Remove that plug. (this is the charge power from the broken usb port) 7. Get a 'PH2' connector with pigtails from your buddy who flys drones. (or get one on amazon) 8. Drill a small hole at the base of the black USB/aux in plastic into the body of the speaker 9. Plug...