Hi! You can cut up an old plastic gift card into roughly the same shape needed. Fit it into the space making sure it is thick enough to put some pressure on the batteries to hold them in place and secure it 1st with paper tape, then 2nd with electrical tape. You can alternatively use: •Cardboard •Mending Plate •Cork •Or even the battery compartment cover from another device, such as another camera or an old remote, etc. If you'd like, can also check out this eBay Listing: for a pretty reasonable price for the replacement cover for Nikon D3000 that includes free shipping, if you're willing to wait from 2 - 4 weeks for it. (Of course you don't have to use the url above and can do your own search for any store/site you choose.) And this YouTube tutorial on How to make a Battery Grip Compatible with a Case. Hope this is helpful for you!

The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose. Try the below troubleshooting steps to resolve. 1 Check the water hose A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine. This means that the water feeding into the machine is not flowing with enough force. The water pressure must be between 0.5bar and 8bar. Fully power off and unplug your washing machine at the mains. Move the machine forward to give access to the water hoses. Check that there are no kinks or bends in the water hose connected to the machine and make sure the hose is not damaged.. 2 Check the water supply Check that the water tap connected to the washing machine is open to full. 3 Clean the water hose mesh filter at least twice a year to prevent build up. Turn off the water supply Disconnect the inlet hose from the water...

Make sure your battery has enough charge to actually run. Hold down the volume down key and connect your device via data USB cable to your PC. Keep the volume button held down until you see a boot menu. Select the 'Start' option using your volume keys.

Edit: the ice maker not calling for water during its cycle could be due to several reasons: 1. Faulty Ice Maker: The ice maker itself might be malfunctioning. If other steps fail, it's possible the ice maker needs repair or replacement. 2. Clogged Water Filter: the water filter could be clogged enough to restrict the flow specifically to the ice maker. Try replacing the water filter. In some cases, the refrigerator may even be designed to stop dispensing ice or water when the filter is past its “replace by” date. 3. Frozen Water Line: While you mentioned good water flow, there could be a section of the water line that's frozen. Check for any frozen sections in the line, ESPECIALLY near the connection point to the ice maker. 4. Faulty Water Inlet Valve: which controls the flow of water to the ice maker, could be damaged or malfunctioning. Check the ice maker inlet valve & water supply tubing for any signs of clogs, leaks, or damage. Look for frozen sections in the line, esp. if your freezer temp is set too...

It is possible the clutch is going out. Sometimes it goes gradually, like 1st, 2nd, &/or Reverse gears start skipping or become increasingly difficult to shift into; other times out of the blue & @ once. ADDENDUM:: ■ The number one cause of all (manual & automatic) transmission problems, from slipping to abnormal sounds, is: low transmission fluid. ■ The gears may be worn out. Have them checked to see if they need to be replaced. This applies even if you’ve taken care of the transmission. ■ Broken Transmission Bands. ■ Failing Torque Converter. If you haven't already done so, I'd suggest taking it to a mechanic or to an Auto Zone. Because when/if it does go out...you will be immediately stranded with an automobile that cannot start and needs to be towed.

Try taking the battery pack out, plug the PSP into the AC adapter like you would to charge it, turn it on, and if all goes well put the battery back in. Wait about 10 minutes with all plugged in then unplug the charger. If the PSP turns off then it is a battery issue. If it wont turn on even with the AC adapter plugged in it is an adapter issue you can also try: Press & hold the following buttons @ the same time: Select->Start->Square->Triangle->POWER

If your UE Boom 2 portable speaker refuses to connect to other devices via Bluetooth, see the UE Boom 2 Bluetooth Pairing Is Not Working problem page for possible causes and solutions. Hold down the volume down button and the power button at the same time Boom will then turn off. Turn it back on and then pair it with your device again Update (06/23/2020): I don’t believe that is true, I could be wrong. It is more of an annoyance to have to do; but really it is recommended to un-pair after every use and re-pair when needed, due to security issues.

could be a blocked drain. Refer to your washing machine’s manual for instructions on how to clear a clogged drain. Frozen Timer. This sometimes occurs after a power disruption temporarily interferes with the washer’s electrical connection or if the washer vibrates during the agitation cycle and knocks one of the timer’s wires loose. Manually advance the timer to “Rinse” and see whether or not the wash cycle resumes. Contact a washing machine repair specialist to inspect the timer. Bad Locking Tab and Lid Switch (top-loading) Even though a washing machine will start if the tab and switch break, the washer won’t rinse or spin unless the tab and switch unite. Open and close the lid. A properly working lid tab and switch will click when the two components come together. If you don’t hear a noise, one or both of the components may be broken. Contact a washing machine repair specialist to inspect the locking tab and lid switch and replace the part that’s faulty.