a 5 min job ???????? LOL
No but you may need it to stick the rear glass back on
Not really…….. I never remove it. It slides out quite easily once disconnected.
Best and safest way to heat up a device to remove screen is with a heating mat………. i set mine at 75deg
battery connector is not accessible without removing the display first………. and reassembling, battery has to be connected first, then the plastic piece and then the display
Terrible video, no description just horrible music/noise
search youtube for iphone 6 tristar, there are much better videos
I have done lots of these on 7 and 7+………. can be done without removing the logic board, which saves a lot of steps.
Gently lift it and slide something underneath it to free it, and you can slide the old port flex out and the new one in……. just make sure its
in the right position and you can connect it to the board before setting the logic board back down.
yes 2 solder connection are hidden under a tiny piece of thin black tape, on the underside of the speaker.
To replace just the earspeaker, you will have to re-use the the flex assembly which is soldered to the earspeaker…….
the 2 solder connection are hidden under a tiny piece of thin black tape, on the underside of the speaker.
For beginners, this video explains the basic steps and equipment needed to replace any soldered usb port on any device.
And It is explained without annoying music.. LOL
Página 1 de 2
Media vez obtengan, podras ver un gráfico de la reputación que han obtenido con el tiempo.
Aquí está una vista previa de cómo lucirá el gráfico:
Aún no has no adquirido reputación.