Este perfil no está completo aún.
Guías completadas
Preguntas
Left and Right arrow not working (L3 and p04) and (L3 and p05) (not reading any measurement) (L3 is on the back of p0...
Leer másHello, My 3ds stopped working.. it fails to boot. not even a blue light is comming on. I checked the motherboard and seems...
Leer másSound doesn't work. Jackplug sound doesnt work also. Before it just worked ? Checked sound fuse, it's Ok! What can be wrong ?
Leer másWhat can be wrong with the psp's i have ? battery can't be it. tested it all out. the consoles dont boot up anymore (no...
Leer másHello, My 3ds is stuck loading its menu and things.... When i push it on the blue light comes on, and farther nothing...
Leer másWhat tools do you need for replacing the CPU on a DS Lite, and wich ways can be used to pry off the CPU ? I'v got 3...
Leer másRespuestas
I decided to give the motherboard a clean up (alcohol bath) I brushed everything carefully with a toothbrush.. I'd put it back in and assembled it... Works perfect again.... Maybe this helps anybody.
Leer másI'v had the same problem. I was still getting errors by luma after complete installation. SO i figured uninstall CFW cause it might causing any problems. I was on ver. 11.6.0 now i was able to access settings (cause most of the time i get freezes) game card isnt even working properly also i get error, while when cfw was on it it worked. I did also a complete system format. Somehow im stuck on 11.6.0 and my 3ds will not boot automatic configuration screen. (just light up black screens) Sometimes im able to boot trough save recovery mode. last time i did this i was unable to update.. now i'v readen something about primary and secondary dns.. i will try this.. anybody else formiliar with this or can help? Thanks!
Leer mássame problem with a water damaged motherboard, still haven't found out what this problem is. Anyone ? Also its possible to boot the motherboard up by connecting the charger cable, and making contacts between the (pwsw/green) (for power) contact and some of the contacts above the leds. or connect it to the resistors, Normaly the motherboard should boot up when you connect pwsw and green, this does not work. But Yeah! There is something with INS- VDET and PVOD contacts, somehow on either other way when you press them and try to turn on the DS it turns sometimes on and off. i am surtain something here with the battery circuit is wrong, maybe, just throw it in the fryer. ^c^
Leer másmark stickers on the back of your bottom screen
Leer mástry replacing the wifi module
Leer másone of the connectors is not connected anymore
Leer másComentarios de guía
my B & X button didnt work anymore, i bought a new button sticker and replaced it. i could not constate dirt or something, but i cleaned the surface a bit, then a placed the button sticker, but still my B & X button dont work, what else can be wrong causing this problem ?