Mis Guías
Respuestas
-
Respuesta a "Why won't my One turn on?"There is an electronic flex board that connects the front panel (the one with the lights) and the front panel board. Make sure the connection is tight and secure. If the connection is good make sure you didn't snap the flex board. Hope that helps.
Comentarios de Guía
Reputación con el tiempo
Análisis de Reputación
Evento | Recuento | Delta |
---|---|---|
Alguien completó tu guía | 19 | 570 |
Un administrador aprobó tu guía | 1 | 108 |
El mensaje fue votado positivamente | 3 | 36 |
A alguien le gustó tu guía | 1 | 10 |
Insignias
1592139
I’m glad it worked for you. For me it worked for about a week before I bought a new controller and battery pack. I’m theory it will work until the foam can no longer expand. You should be able to just change the foam.
Awesome I’m glad it worked for you. Just keep in mind the controller or the battery pack could really be failing. But I’m glad it worked as a quick fix.
Glad it worked for you. Thanks for leaving a comment. Please note though I had this issue but as it turns out it was my controller. I did end up buying a new one. But in a pinch or at 2am this will help and keep you from tossing the %#*@ thing out the window.
Let me know if you have any issues or any suggestions on how to make this guide better. I ran into this issue and as normal MS was less than useless. I ended up replacing the controller, the USB cable and the battery in hopes that something will fix it.
How do you replace the screen once the glue is melted?