Abe Arslan

Hey Buddy! here is a list of stuff to check for that window issue Check battery terminals Check Fuses Check window track for debris have a mechanic test your window motors. they tend to go bad on older vehicles. im not too sure what the pin outs are but look for corrosion on the wires

it looks like your video card may be going bad .On the older macbooks ive seen, that is how it looks. Try using a fan under your machine or cleaning out any dust with canned air. That may not fix it but slow it down enough. Good luck mate Happy Fixing!!

Has there been any liquid spilled on it? the rubber pads under the keys may be worn out.

hmm. this looks like it could be board damage. Try taking it to a repair shop that does micro soldering . They have a microscope to look at your MotherBoard . You stated you replaced all the components . The only one you didn't replace was the board. Try that and keep the rest of us in the loop with your progress! Happy fixing!

Hello tarquin, I am Abe. I see you are having some crazy issues with your alien ware machine. My first step would be looking into a new logic board. the smoking you may have seen may have caused irreversible damage. If possible find a Computer shop near by that does micro soldering. they may be able to help and identify that chip for you. With that picture you posted I doubt that you will be able to resurrect that piece but do not loose hope! keep us in the loop!

uso esto https://www.newegg.com/Product/Product.a...-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Hard+Drives-_-N82E16822236339&gclid=CjwKCAjwlcXXBRBhEi...-X8RaqT29XdYdB2XeKdrBTsM2hoCGNEQAvD_BwE&g...

I believe your LCD is expanding I dint know how it would but its possible . Further investigation is needed. Id check into that over heating issue you mentioned. Try keeping the machine open and shut down regularly. and then keep me in the loop!

hello! I run a repair shop in NW Florida. I need to know how to get the ORIGINAL button to click. the Touch ID works wonderfully but the main issue is that the nipple on the back plate of the home button won’t click the switch on the home button. any useful tips to make them connect? are there any jerryrigged stuff that you all have tried? i’m open to all ideas