Este perfil no está completo aún.
Preguntas
Anybody got any tips for cleaning the bezel so it's near enough perfectly clean? i do oca repairs but only ever did a few...
Leer másPhone has been working fine then possibly ran out of battery and now it is not charging any ideas
Leer másHi, I have a phone lcd is fine no cracks etc touch screen isn't responsive in areas and has black squares. Yes the lcd is...
Leer másDoes anybody know of sites that are accurate that can check IMEI blacklist for free? I use imeipro at the moment but not...
Leer másHi, I have a 5s that was returned by a customer. Originally he bought it and messaged me saying it was completely dead, I...
Leer másI have a 5s that isn't water damaged and the battery drains really quick in standby. It has been updated and I've replaced...
Leer másI got 2 5c's both good both was working fine but started not to charge. I put it down to the cold weather that damaged the...
Leer másMy friend has an iPhone 6 which I refused to fix because of the home button issues. His home button doesn't work at all so...
Leer másI have refurbished an iPhone 5 into a "6 mini" housing. Done a few of these, no problems. Had to change the battery in one...
Leer másIs there any good apps to test battery performance? Ideally I want to charge the phone to 100% and run an app that will...
Leer másPág. 1 de 2
Respuestas
This is moisture from the autoclave getting into the backlight. This happens with the 6s onwards because the adhesive apple uses on the backlight isn't strong enough to hold the 3d touch panel. The adhesive is spongy and you can actually wiggle the backlight side to side. To prevent this you can autoclave for less time or put the screen in a food saver bag. The lines will fade over time. A day or 2 they will be gone or hardly visible.
Leer másYou will be very lucky to find somebody who would touch this phone There risks are huge with very little to gain. I wold buy a Note 4 and return this for a refund
Leer másAre you sure it's not IMEI blocked?
Leer másThe screen is an exact fit, if there is a dent stopping it from fitting straight then it's not going to fit properly. There's so much you can get away with but if it's bad it won't fit. Like Rany said g-tool is the best bet or use some pliers and protect the housing as much as you can cause it's likely to destroy it. Sometimes I shed parts of the bezel off with a razor blade to make it fit. It doesn't look any different.
Leer másYou need to disconnect the battery, wait a few seconds then reconnect it.
Leer másI would try putting the phone in DFU mode and updating/restoring it. Let the phone die and then charge to full If it happens again the battery needs replacing
Leer másThis is not a diy repair. Not only will all the equipment cost more then the phone but it's likely you will break the phone in the process. If you can post internationally I would message @jessabethany and see if this is something she would be able to offer you. Not sure if they do international postage but worth a shot as she's your beat option if you have nobody in your country who can carry out the repair
Leer másThere is no way Apple can tell if you have opened the phone as long as you don't break anything or strip the bottom screws. Apple will only know you've opened it if screws are badly stripped and insulation tape etc have been removed and reused.
Leer másIf your battery drains quick try replacing the battery. If that doesn't work and it's the same then your U2 IC probably needs replacing
Leer más$4200+ or 148 genuine iphone 6 lcd's
Leer másPág. 1 de 3
James Carter
@jamescarte38971
465
Reputación
30
Soluciones
0
Guías
Es miembro desde 11/02/15
Equipo
James Wilson
iPhone & Samsung Repair
Votos
1
0