My BRCK is only lasting about an hour after the device is fully charged. How do I fix this?

The device will usually not turn on, but when the device does turn on, it does not hold a charge.

I am having issues with my device connecting to the internet and I can't figure out how to fix this issue.

If your BRCK v1 is not holding a charge, you may need to replace the battery or fix the connection connecting the mother board to the battery. To view how to make these corrections, visit our repair guide page. Battery Replacement Battery Connection

If your device won't turn on or won't hold a charge, then one of two things may need two happen. You may have a faulty battery in which that part of the device will need to be replaced. Another issue may be that the connection to the battery may be bad or disconnected all together. For both of these issues, refer the BRCK v1 repair guide. Battery Replacement Battery Connection

If you are having an issue with your device connecting to the internet, then one of two things need to happen. You may need to replace a faulty antenna, which will by noticeably out of service with a significant crack, bend, or snap. If this is not the case, then there is most likely an issue with the modem or the modem SIM card, in which these items will need to be replaced. Refer to our guides on how to replace these items. Antenna Replacement Modem Replacement Modem SIM Card Replacement