press and hold the “Options” button and “+” button for 5 seconds

Found this comment on Amazon, might be worth a try: I had the same problem. I charged the battery till the light turned green, then loaded the film. The cover was ejected. Then all the mode symbols started flashing and I couldn't even take a photo. I tried various things e.g., removing the battery and cleaning the terminals, still didn't work. The ONE thing that did work was, turning the camera ON, while it is ON, remove the battery and leave it out for approximately 3 minutes. Then I put the battery back in, and it started working. While I was waiting for the 3 minutes, I also was pressing the back film cover in. Maybe the flashing means the camera thinks the cover is not closed??? Anyway, hope this helps someone with the same frustrating problem

Check Sparkplugs for loose wire, dirty connection, or debris. Spark plugs on small equipment can also break pretty easily since they are exposed.

You can replace the Hard Drive with a 3.5" drive, but a 10TB is sold at a premium for its density +$500. So technically yes, but I wouldn't recommend it. The rubber pad removal can get messy since its is glued on. If you are adamant about changing out the drive, maybe try the 8TB from Seagate ($235ish).

It's the ambient light coming through the dell logo on the other side of the screen? Please post model number as dell makes 100's of touch screen computers.

Check the belts, the craftsmen mowers tend to stretch the belts pretty quickly. I ended up changing my Dads belts every month to keep it running ok during the summer.

Yes there are front glass repair kits online <$20 or a local shop can replace it for you.

This page at apple will help you: Ipod Touch ID Chart

The blinking light is a diagnostic mode the TV enters when a problem is detected. A power reset is re commended: 1. Unplug the TV from power. 2. Wait 60 seconds. 3. Plug the tv back in, use a wall outlet. and/ or you can try a factory reset: Turn on the TV. While holding the up arrow button on the remote control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the up arrow button. Your TV's info can be found at :Sony Support Page

If the broken Nexus 5 was signed into your google account, you can sign the new or repaired nexus 5 in to the same google account and restore your files.