Este producto no está disponible en tu país.
Codigo del Articulo: IF303-089-1
Este producto no está disponible en tu país.
USD 6.99
En venta
Partes usadas A-Stock están en excelente condicion
Partes B-Stock tienen un desgaste cosmético de menor importancia
Partes C-Stock tienen un mayor desgaste cosmético, pero son totalmente funcionales
USD 6.99
En venta
Agotado
No tenemos mucho stock disponible
Detalles del Producto
Descripción
Descripción
Replace the adhesive film that secures the rear cover panel to the back of your LG G6 smartphone.
Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping needed with these custom cut adhesive strips.
Cuentos de Reparación
Two year old battery was needing recharge more than once a day.
It went well. The two trickiest points were in getting a wedge to break the adhesive seal of the back. Heat gun helped, but I needed a knife blade to initially break the seal. After that sliding a guitar pick around the edge did the rest. Second tricky part was to dislodge the old battery from its original adhesive, which required short use of heat gun and some gentle prying with a metal tool.
Patience and slow, steady pressure to pry up the original battery.
Two year old battery was needing recharge more than once a day.
It went well. The two trickiest points were in getting a wedge to break the adhesive seal of the back. Heat gun helped, but I needed a knife blade to initially break the seal. After that sliding a guitar pick around the edge did the r . . .
Los clientes también compraron
Productos Destacados
