Repara tus cosas Comunidad Tienda

Primera generación de iPad de Apple con Wi-Fi, disponible con 16, 32 o 64 GB. Número de modelo A1219. Reparaciones sencillas que no requieren aplicar calor.

Preguntas 130 Ver todo
Pregunta Cerrada

Opciones

Why does my iPad randomly think there are headphones plugged in?

Ok so before I close it up I should investigate this.

I get no sound from the iPad because it seems it thinks I have headphones plugged it. The socket looks clear, nothing broken off in there, when I remove the ribbon cable, no change. But when I plug the ribbon cable back in, sound comes back for a few minutes then.. Presto. It thinks I have headphones plugged in again!

What can I do to resolve this?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

I just pushed down on the cable about half way up and the problem went away so I'm inclined to agree. It does move the socket too though so I hope they didn't try to flip up the wrong side of the connector..

Mystery solved though, let's see what fixes it permanently.

Thanks!

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Replace your headphone jack flex.

Regards,

Tough Gaming Technical Support

Agent Elisha

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Opciones

Hello, I had this same problem. I basically opened my ipad unclipped the headphone ribbon cable, put it back in and presto Ipad was funtioning correctly, it simply needed some sort of reset. Warning be careful and take your time removing the screen. Those mid frame clips that hold screen in will break but they are super easy to replace, and the digitizer, lcd, and wifi cable (s) are connected to motherboard. So be careful, hope this helps.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 9,050