Saltar al contenido principal

Instrucciones de reparación y desmontaje de la cafetera totalmente automática Jura Impressa F50

How to perform decalcification forcefully on Jura F50.

My water flow is very weak and I think it's due to no decalcination cycle in a long time. In instruction it says to wait for message and only then you can do it. There is no maintenance menu for separate de-scaling.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

4 Respuestas

Solución Elegida

@vladyslavm48017 here are the DESCALING instructions right from the manual Chapter 18:

Block Image
Block Image

and in writing just in case the images are not good enough :-)

Descaling

Again, these are the DESCALING instructions, NOT the cleaning instructions

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Thank you all for help. My translated manual didn't have a line about screen off.

- de

Agregar un comentario
Respuesta Más Útil

(0) Important prerequisite: machine is in stand-by, filter status off.

(1) Press the rinse button for four seconds

(2) Now empty the drip tray as requested, it must be outside for at least 5 seconds.

(3) Dissolve the descaling agent (Ammonium sulfatic acid is best) and pour it into the tank. Place a larger container under the steam outlet.

(4) Turn on the steam tap

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

It is normal cleaning instruction, it will not start de-scaling process, that I want to do.

- de

No, this is for descaling. Perhaps I should write "maintanance button", nor "rinse button". Anyway, this is the button with six drops on it.

- de

Agregar un comentario

I’ve used CLR Lime & Rust cleaner and making sure to fully rinse out the reservoir and lines. You may need to use a loadable pod to fake out the machine.

Fue útil esta respuesta?

Puntuación 0

4 comentarios:

How do I start decalcination on this coffee machine? There is no button for this or menu button. I can only hope that message that it needs decalcination pop-up. I have cleaning powder for decalcification.

- de

I need to do de-scaling. Not ordinary cleaning.

- de

@vladyslavm48017 - I don’t know this exact system, cleaning is just the term used by this maker as there is really no difference between cleaning and de-scaling (removing lime build up) is just the chemical aspect of cleaning using more effective solutions than water alone.

- de

Agregar un comentario

Cu expresorul oprit, țineți apăsat pe butonul de clătire, până apare mesajul de curățare a tavitei,...in acel moment, incepe propriu zis procedeul de decalcifiere...care are durata de circa 40 minute....

Spor...

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Vladyslav Mrynskyi estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 12

Ultimos 30 días: 79

Todo El Tiempo: 308