Repara tus cosas Comunidad Tienda

Fibra y material textil que se usa para estilo, seguridad y protección de los elementos.

Preguntas 344 Ver todo

Opciones

Identification of Carhartt Jacket Snap

I need to lengthen the sleeves my Carhartt Detroit jacket. I want to install snaps to the sleeve extensions. Carhartt sent me jacket snaps, (see attached.)

I'm familiar with regular cloth snaps and have a crimper for their installation. The snaps sent by Carhartt are different. Looking at the existing snaps on the sleeves, I assume that these snaps are set using normal die punch tools. However, I'd like to see the installation of these types of snaps.

Can anyone confirm the correct installation tool for these snaps and ideally provide a video or guide

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Hi @deees

Not quite how to install but here's a video that shows how to remove the snap fastener.

Unfortunately the video then goes on to show how to install a different type of snap fastener though.

It might give you an idea of what you could do.

You could use an anvil (example only) and some sort or punch e.g. small hammer, to join the inner fastener to the outer fastener

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Thanks for responding. I also found that video previously. Unfortunately, I can 't seem to find an installation video.

I'll leave this thread open a little logger in the hope someone else in the Repair Community can find one, (or make one.)

- de

Agregar un comentario

Añadir tu respuesta

David S. estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 25

Todo El Tiempo: 221