Repara tus cosas Comunidad Tienda

La Kenmore 110 Series es una lavadora para el hogar de fácil uso creada por Kenmore.

Preguntas 498 Ver todo

Opciones

My Kenmore 110 washer will only fill under the rinse and spin setting.

My Kenmore washer will not fill. It does fill on rinse and spin setting, which I tried after watching a YouTube video. My understanding from the video was that this meant it was either a timer or temperature switch. But the video didn't line up with my washer, it was for an older type of unit. I've been trying to figure it out by looking at YouTube videos but to no avail so far. Any advice is appreciated. Thanks

Update (08/29/23)

Model number is 110.22352511.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Hi @ericwillia96978

Wonder if it is a problem with the hot water supply or the hot water inlet solenoid in the washer.

Hot and cold water can be used for the wash cycle but cold water only is used for the rinse cycles

Check that the hot water supply to the machine is 120°F (49°C).

If the hot water supply temperature is OK here's the tech sheet for the washer.

Run the diagnostic tests as shown on p.4 (see Automatic test mode) and check if any error codes are being displayed.

See the Fault/Error Code Display Method chart on p.3 for how to interpret the status LEDs if any codes are shown.

The meaning of the code and the possible causes are shown on p.6-p.7

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Añadir tu respuesta

Eric Williams estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 9

Ultimos 30 días: 17

Todo El Tiempo: 89