Saltar al contenido principal

La Valve Index Base Station es un dispositivo que se utiliza para rastrear la posición de los cascos y controladores de realidad virtual. Utiliza tecnología infrarroja para rastrear con precisión la ubicación del equipo de realidad virtual en una habitación, lo que permite una experiencia de realidad virtual más inmersiva y receptiva.

Preguntas 2 Ver todo

What type of connector is used for the base station power cable?

The cable going between the wall wort and the base station had the connector snap in the wall wort. It's a small two prong adapter with a plastic flange that seems like it'd be relatively simple to re-solder if I could find a spare, but I have no idea how to find it. A name or a purchase link would be fantastic. To be clear I am referring to the plug on the other end of the cable from the barrel plug. I believe it is some kind of molex connector?


Block Image

Male (this is the part I need to replace):

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

A pic would be super helpful

- de

Updated with photos. I've done some more digging and I think it might be a molex micro-connect

- de

Agregar un comentario

2 Respuestas

Solución Elegida

This is most likely a molex connector, as you have pointed out.

As far as I can tell, this should be part number 436450200 which you can view and also get a 3D model of on their official website.

Fue útil esta respuesta?

Puntuación 3

1 comentario:

PS: Had the same issue on mine. I feel like this was a very bad design choice...

- de

Agregar un comentario

The type of connector used for the base station power cable is typically either a barrel connector or a DC plug.

A barrel connector, also known as a coaxial power connector or a cylindrical power connector, is a circular electrical connector that is commonly used for providing power to electronic devices. It typically consists of a central pin surrounded by an insulating sleeve and an outer metal cylinder that helps to hold the connector in place.

A DC plug is a type of connector that is used to deliver direct current (DC) power to electronic devices. It typically consists of a cylindrical body with metal pins or blades that are inserted into a corresponding socket or jack to deliver power.

Both of these types of connectors are commonly used for providing power to base stations, due to their low cost, ease of use, and reliable electrical connection.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Walter Gray (Shenanigans) estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 26

Todo El Tiempo: 373