Repara tus cosas Comunidad Tienda

El modelo DualShock 4 CHU-ZCT2 fue anunciado en 2016 para relevar al modelo CUH-ZCT1 que fue lanzado en 2013. Este mando es similar al modelo previo.

Preguntas 268 Ver todo

Opciones

PS Button and parts of the D-Pad not working

Hi! So, I recently wanted to boot up my PS4 again and play some games with a friend... but then the controllers wouldn't turn on. I tried connecting them to my PC - they worked but when I connected them to the PS4 they refused to work with it.

I thought it's battery issues so I left them to charge and afterwards they wouldn't work yet again. I opened them and saw nothing wrong... and then it hit me. The issue is the PS / Power button.

I connected the controllers back to my PC, installed DS4Windows, mapped all buttons to keyboard keys and opened a key logger. Everything except some of the D-Pad buttons and the power buttons worked.

Now, the buttons themselves seem completely fine. There's no visible issues. Can it be the little transparent / green plastic thing that stays under the buttons? If it is, can I replace it?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Whoa, this was back in December?

Anyways, I ordered two replacement membranes and swapped them. This fixed one of the controllers, however I &&^&@@ up the ribbon cable for the USB of the other one so I can't really confirm if it fixed it.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario
Respuesta Más Útil

Opciones

Check the black parts on the clear rubber for the buttons are clean. Also clean the contacts on the board with an eraser then try it.

Fue útil esta respuesta?

Sí No
Puntuación 1

5 comentarios:

Hey, sorry for the late reply.

Can you be more clear about what you mean by "clean the contacts on the board"?

- de

@uskizzik on the flex where the buttons are. There are some contacts where the buttons sit above.

- de

So the black parts right below the buttons? Clean them with an eraser? Like... a pencil eraser?

- de

@uskizzik yes but gently. You’ll see the film with the contacts I’m talking about in step 7 on this.

Cómo arreglar la deriva analógica del controlador PS4 (R3 o L3 no funcionan)

- de

@strongbow Didn't seem to improve at all...

- de

Agregar un comentario

Opciones

unfortunately this is an indication that the Flex Ribbon Connector is starting to wear, this is either a simple fix with some 99% ISO Alcohol and a cotton tip to clean where the Circuit board meets the Ribbon or a replacement ribbon entirly

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

uSkizzik estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 34

Todo El Tiempo: 415