I have accidentally push the charger into the charge port in the wrong direction and have bent two of the pins inside the port. I need to replace the charging port but I am struggling to find parts or a guide. Any recommendations on where I can find a replacement port for Sony Wh1000xm2?
Es esta una buena pregunta?
Rep: 3.3mil
12
3
3
I made a guide on a similar model
Sustitución del puerto de carga USB de los auriculares bluetooth SONY WH-CH700N
I think the micro USB part is similar in yours:
https://www.ebay.co.uk/itm/142512274587
Hope it helps!
Fue útil esta respuesta?
Hi Honakrisi, thanks for the guide. Here is a link of the part I am looking for.: https://imgur.com/2tf0lNi
Would you happen to know if I am able to source this part with the board or if it is better to solder the port on?
I think you would struggle to find the charging board assembly. I would just desolder the port and put a new one on. Much more cost effective as well.
If your in Australia, grabbing a port from jay car works. I've done this before and it still works wonders
If not, disregard all of that and just find a cheap but quality port and a soldering kit (If you don't already have one)
Ultimas 24 horas: 0
Ultimos 7 días: 6
Ultimos 30 días: 44
Todo El Tiempo: 779
if you can get it opened and post a photo of the port it would help as not all ports are specific to an item
- de daniel
hi Daniel I have managed to get it open, here is the image: https://imgur.com/2tf0lNi
- de Kajol