Saltar al contenido principal

Modelo A1419 / Finales de 2012 / Core i5 de 2,9 y 3,2 GHz o Procesador Core i7 de 3,4 GHz, ID iMac13,2

Preguntas 330 Ver todo

Monitor has vertical lines at start-up.

At the startup chime the display comes on with these vertical lines. As the boot-up continues the screen color changes indicating the system is running. I accessed the the diagnostic LEDs, all 4 are lit.

Do I need a replacement display or logic board?

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Your display panel is damaged, you can prove that by hooking up an eternal display as the image on it will be clean. This is a common issue with the newer Thin series as the display is glued on so if you don't use the correct tools and techniques to remove it you can easily damage the display.

Here's the needed tools:

And Parts:

And here's the guide which you need to follow: iMac Intel Reemplazo de pantalla de 27 "EMC 2546

Imagen de Plastic Cards

Producto

Plastic Cards

$2.99

Imagen de iFixit Opening Picks (Set of 6)

Producto

iFixit Opening Picks (Set of 6)

$4.99

Imagen de iMac Intel 27" (2012-2019) Adhesive Strips

Producto

iMac Intel 27" (2012-2019) Adhesive Strips

$19.99

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Yes, I believe you are correct. The trick in my situation was the external monitor would not actually work unless I disconnected the display panel from the logic board.

- de

Agregar un comentario

Añadir tu respuesta

Jack Granato estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 11

Ultimos 30 días: 27

Todo El Tiempo: 638