Saltar al contenido principal

La Kenmore 110 Series es una lavadora para el hogar de fácil uso creada por Kenmore.

Preguntas 501 Ver todo

only sensing light comes on.

i have a kenmore series 500 washer. model number-110.25102310 the washer stopped in the drain cycle with lid locked light on. i canceled the cycle and tryed to restart on the drain/spin cycle. only the sensing light came on with a faint click but lid lock will not engage. i unplugged for awhile and plugged back in. tried entering diagnostic mode and will not go int it. the sensing light keeps coming on and nothing else. even after unplugging for awhile and plugging back in it will come on after about 10 seconds.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Hi @tman3225

Did you try the auto test mode diagnostics or the manual test mode diagnostics?

If auto try the manual (see p.4 & p.9) of the tech sheet to see if you can isolate the problem by testing the individual functions of the machine.

If no good try checking the main control board voltages as per Test #1 main Control on p.12

Fue útil esta respuesta?

Puntuación 1

2 comentarios:

When trying to enter into diagnostic mode per the tech sheet. I could not get it to. I’ve done it before when it would continuously run cycles a few years ago. I will check control board now.

- de

Definitely the control board. Getting a new washer. Thanks

- de

Agregar un comentario

Añadir tu respuesta

tyler phillips estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 20

Todo El Tiempo: 288