Repara tus cosas Comunidad Tienda

{A1989 / EMC3214}-Lanzado en Julio de 2008, el MacBook Pro de 13 pulgadas cuenta con el procesador Quad-Core i5 e i7 y gráficos integrados Intel Iris Plus.

Preguntas 203 Ver todo

Opciones

Flickering Screen/Screen issues when bottom left corner is pressed

Hi all, just picked up a 2018 MBP 13” at a bargain. Seller stated that the chin has been cracked and the screen started acting up afterward.

The weird thing is that the screen states change (working, flickering) to (dead, vertical but very colorful bars or black bars with white lines separating them) when touching/pressing on a specific part of the ribbon.

Block Image

From my (unprofessional) opinion, it’s not flexgate because closing/opening the lid or angling it doesn’t change the state of the screen. Seems to be isolated to the bottom left ribbon cable on the lcd assembly itself. I’ve removed a part of the chin to investigate further. See below.

Block Image

Pressing mid left on the ribbon

Block Image

Pressing mid right on the ribbon

Any ideas on what this may be? Or how to fix it? Cashing out on a new Display assembly will make me a very sad person.

Thanks for your help!

EDIT 1: SMC/NVRAM reset didn’t work. Flickering stops when any animation is running ie. moving the mouse. Also, flickering stops completely when booted into safe mode

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

What you are touching is the video feed lines from the T-CON board to the LCD display its self. These are thin foils wires within the ribbon cable. The joint of the ribbon cable to the glass surface is quite fragile! The connection is to a very thin metal oxide pad which can be lifted off the glass.

Think how a piece of tape stuck on a painted wall can often pull the paint off when you lift the tape damaging the paint job!This is what has likely happened and/or the thin foil wires are damaged.

While you could replace the chin plate, I'm not sure your issue will be solved by that. It appears your pressing is creating the issue or is it resolving the issue.

You may need to replace the full display assembly to properly fix this Reemplazo de la pantalla de la MacBook Pro 13" Touch Bar 2018

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

Thanks for your reply pal. Booting into safe mode and updating the OS from there seems to have fixed the flickering issue so far. Strange. Still can see a very fain vertical black line running down the left side of the monitor. Thinking of poking around to make sure everything works before applying a new chin

- de

@lex1 - Sure itching your ear fixed your broken leg ;-{

This is a physical defect not a software issue. Installing the OS does force the system to work harder which in turn creates heat! Temperature can effect the ribbon cable connection.

- de

Agregar un comentario

Añadir tu respuesta

Lex Zahv estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 10

Todo El Tiempo: 407