small parts that are appeared suddenly
plz teach me the parts to use and how to constract in iphone4
reference in jp URL:
http://detail.chiebukuro.yahoo.co.jp/qa/...
thx
Es esta una buena pregunta?
Puntuación
0
72724
2 Respuestas
Respuesta Más Útil
Rep: 5.1mil
34
36
6
Your picture is not very clear but here is my guess:
The part on the right is for covering the battery cable contact.
iPhone 4 Display Assembly Replacement
- look at step 5. It is under the shiny small part.
The part on the left is very important. Without it you may have terrible wifi.
iPhone 4 Display Assembly Replacement
- step 13. It is under the green area. Take a look at this discussion on how to put it back on:
Fue útil esta respuesta?
Puntuación
4
Rep: 35
3
1
The shiny part you will find here. The second step on that page has 2 pictures. There you will find it. I sits on the mute/silence button.
Fue útil esta respuesta?
Puntuación
3
Thanks Jonas. I could not guess to look at other steps since one usually does not touch that button when only changing the LCD. I saw now that the question did not state that he was changing the screen but a general take-apart and assemble question. Sorry tktktktkk, I should have seen that. How is it going with the wifi? I understand this is still an issue?
12 comentarios
THANKS!but I can't find shiny small part in the picture.
the left one is I understand.
very thx!
- de tktktktkk
sorry,I don't know the place of the silver small part and how to put in .
plz teach meeeeeee
- de tktktktkk
http://detail.chiebukuro.yahoo.co.jp/qa/...
- de tktktktkk
Here is the shiny part. Look at the shiny part he is prying up on: http://guide-images.ifixit.net/igi/rTWBp...
For the wifi part take a look again at the discussion I referred to:
www.ifixit.com/Answers/View/38247/wi-fi+distance+was+reduced and read the post from Chavdar Sirakov and his pics.
The small part is on top of step 14. iPhone 4 Display Assembly Replacement
Maybe this picture will show you how to position it back:
http://www.parts4ipods.com/WebRoot/Store...
The part slides on the contact. I would also use some contact spray on the spot to ensure good contact.
- de asle
sorry,I can see green mark. I think this part to put it on the green mark place.
but I can't understand how to put it on.
plz help me
http://detail.chiebukuro.yahoo.co.jp/qa/...
- de tktktktkk
Mostrar 7 comentarios más