Saltar al contenido principal

Procesador Intel de doble núcleo modelo A1502 / 2.4, 2.6 o 2.8 GHz / Lanzado en octubre de 2013

Preguntas 552 Ver todo

MacBook Pro late 2013 wifi no hardware installed

Hello, I got a late 2013 MacBook pro, A1502 emc2678, that works almost perfect but it says WIFI: no hardware installed. I looked inside and saw that the coax connector was torn off on the airport card so I replaced that but even after replacing the card it stills has that same error. I don’t know if the cables are damaged as well or if the logic board is.

Here is a link to the images of the mac: https://imgur.com/a/fccIbiV

Block Image

Block Image

Block Image

Block Image

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

1 comentario:

Can you post some pics so we can see the damage Agregar imágenes a una pregunta existente

- de

Agregar un comentario

1 Respuesta

I do see a bit of tarnish on the contacts that should be cleaned. Find a fresh (still soft) pink pencil eraser. Carefully wipe the contacts in the direction of the pins, then wipe down the surface with a damp lintless cloth with 90% or better isopropyl alcohol (reagent quality) see if they helps. otherwise I think you need a new AirPort board.

I don’t see anything wrong with the cables did the connector pop off? If it did you might have a short or not a good connection.

MacBook Pro 13" and 15" Retina (Late 2013-Mid 2014) Airport/Bluetooth Board and the guide Reemplazo de la placa AirPort del MacBook Pro 13" Pantalla Retina de Finales de 2013

Imagen de MacBook Pro 13" and 15" Retina (Late 2013-Mid 2014) Airport/Bluetooth Board

Producto

MacBook Pro 13" and 15" Retina (Late 2013-Mid 2014) Airport/Bluetooth Board

$49.99

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Jake Briggs estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 17

Todo El Tiempo: 132