Repara tus cosas Comunidad Tienda

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2695 Ver todo

Opciones

iPhone 6s is stuck in boot loop after battery replacement.

My iphone 6s had a bad battery when I bought it from one of my friends. I was aware of it too but was just looking for a backup phone. One day my 6s just stopped charging and eventually died. Tried multiple cables to see if maybe it was just a bad cable even tho they all worked with my Xr. Eventually I just bought a battery and replaced it. It started up and worked but wouldnt charge again. So I got the charger port replaced. After I was finished It started charging but got stuck in a boot loop. The battery holds a charge even when unplugged the phone still does it till I force the buttons down to force shut down and then it turn on and do the same thing till u force it off fast enough it stays off. Couldn’t figure out really what to do abt it at this point.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

All you had to do is press and hold the power button for 5 minutes and it would've reset the battery state and come back to life. It's a typical behaviour of any iPhone once the battery has been replaced... I know it's too late for you now but let's leave this info here for others to benefit.

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

If you are sure the battery is not faulty and the connector is seated properly you will need to try an update as the 6s sometimes needs one after a faulty battery.

·         Have iTunes open on pc or mac with lightning cable connected just to PC.

·         With the phone turned off, Hold the home button in and connect the cable.

·         Wait for recovery mode to show up.

·         Update the phone.

If this doesn’t work it will more than likely be a parts problem either battery or charge port.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Opciones

All you had to do is press and hold the power button for 2 minutes and it would've reset the battery state and come back to life. It's a typical behaviour of any iPhone once the battery has been replaced... I know it's too late for you now but let's leave this info here for others to benefit.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

do i hold the power button for two minutes when it is on or do i shut down first then hold the power button for two minutes after it is off?

- de

Agregar un comentario

Añadir tu respuesta

eli estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 22

Ultimos 30 días: 109

Todo El Tiempo: 2,131