Charging port not working
My omni10 HP charging port has spoil… How can I get the pot so that I can Change it please
Es esta una buena pregunta?
Puntuación
0
697743
1 Respuesta
Solución Elegida
Rep: 783.4mil
1.1mil
893
2.3mil
Olabode olawale the port is soldered to the motherboard. So you will have to remove the board. Follow something like this guide HP Omni 10 Battery Replacement to at least get to the motherboard. There are not a lot of guides out there yet. Once you have the board out, you will need to un-solder the old port and replace it with something like this
Fue útil esta respuesta?
Puntuación
1
