Saltar al contenido principal

HP Omni 10 Battery Replacement

Qué necesitas

  1. HP Omni 10 Battery  Replacement, Battery: paso 1, imagen 1 de 1
    • Remove the back cover from the tablet.

    • The cover is securely fastened to the device and may be difficult to remove.

  2. HP Omni 10 Battery  Replacement: paso 2, imagen 1 de 1
    • Push the black plastic security flaps into an upward position.

    • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

    • Lift the tab on the strip up and pull it across the battery.

    • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

  3. HP Omni 10 Battery  Replacement: paso 3, imagen 1 de 1
    • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip's head screwdriver.

  4. HP Omni 10 Battery  Replacement: paso 4, imagen 1 de 2 HP Omni 10 Battery  Replacement: paso 4, imagen 2 de 2
    • Unhook the cord from the edge of the battery.

    • Pull the wire circuit out and down.

  5. HP Omni 10 Battery  Replacement: paso 5, imagen 1 de 2 HP Omni 10 Battery  Replacement: paso 5, imagen 2 de 2
    • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Alex Miller

Miembro Desde 10/11/16

345 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 1-1, Leahy Fall 2016 Miembro de USF Tampa, Team 1-1, Leahy Fall 2016

USFT-LEAHY-F16S1G1

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 10

Todo El Tiempo: 3,957