Charging problem after replace rear panel and dock connector

Question

iPhone 3GS

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1500 Ver todo

Lejo @lejo33155

Rep: 1

1

Publicado: 6 de nov. de 2011

Opciones

Charging problem after replace rear panel and dock connector

Hi:

I just change the rear panel, and the dock conector

from my iPhone 3GS model A1241.

Everything is working fine,

- on/off/home button

- /volume button/mute button

But when it's connect the iphone to the computer (Imac) or

wall adapter, never fill out the battery. The itunes

don't recognize iphone, so i can't do back back up data.

Before the replacement, the battery was working good

What can be wrong ?

Thanks

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación -1

Agregar un comentario

3 Respuestas

Solución Elegida

Garry @garry25418

Rep: 961

iDoctor, LLC.

8

1

Publicado: 6 de nov. de 2011

Opciones

First I would check to make sure the dock assembly is connected properly and is sitting right on the logic board. Also check if it is getting an antenna signal and home button working.

If those check out you may want to look for pins missing in the dock or other debris causing an obstruction.

The cord you are using could be defective (if using the same cord).

I don't think it would be the battery in this case because iTunes isn't recognizing either.

Fue útil esta respuesta?

Sí No

Puntuación 0

Agregar un comentario