Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1500 Ver todo

Phone goes into silent/vibrate mode when touching the upper left area

Replaced the jack cable, but now when I lightly touch or press the upper left corner area it puts the phone into silent mode or vibrates (turned off now b/c that got annoying fast).

Everything is in place and aligned, can't see anything that would be touching or causing this. Compared to another 3GS and everything looks the same (in place).

No idea what's causing this?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

I can't be the only one that's experienced this?

- de

I am having the same issue

- de

Agregar un comentario

2 Respuestas

Solución Elegida

put mute switch on flex in down position is easiest for getting alignment right. Check you have mute button on right way (dot at top near screen) should only really fit in that way but it can be put in upside down and then the mute switch has no "groove" to keep it in place.

Fue útil esta respuesta?

Puntuación 4

1 comentario:

How exactly should you remove and re-insert the switch?

- de

Agregar un comentario

The only thing it can be is the alignment of the tab that inserts into the outer switch. If it's off ever so slightly it will do this. That's the worst part (in my opinion) to remove and put back.

Good luck

Fue útil esta respuesta?

Puntuación 1

1 comentario:

I don't understand what you are referencing iDoctor. Could you be more specific please? I have an iPhone 6 SE

Many thanks

- de

Agregar un comentario

Añadir tu respuesta

chris estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,112