Component burnt, computer with no signs of life

Hi everyone, I have a problem with my 2016 Macbook pro model A1708. I state that I perform repairs on other types of machines but not on apple.

Suddenly the computer stopped working, not showing signs of life, so I decide to open it to see if there was something understandable at first glance.

I find the schematics online and identify the component that has burn marks, the component in question is the inductance L2950 which is short-circuited to the ground, together with components C2951 and C2952. Trying to remove L2950 and C2952 the short circuit remains, which if I understood correctly from the brd file recovered on the network could be caused by the component present on the back of the card always near the two type-c ports named as U2800. Is there anyone who can tell me where I could find if he was the problem with the U2800 integrated circuit? Some advice? Anyone who has had the same problem? If it cannot be resolved, can you tell me what is the method to recover data from the SSD disk that has proprietary attack?

In leaving you to the attached photos I thank anyone who can leave me a comment, thank you very much.

Block Image

Block Image

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

You may be able to use a data recovery tool such as the one shown in this article to recover the data from the damaged logic board. Unfortunately I don't have any additional advice. https://www.it-tech.com.au/how-to-recove...

- de

Agregar un comentario