Repara tus cosas Comunidad Tienda

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 2264 Ver todo

Opciones

Why does my front camera and sensor cable keep sending me into reboot?

IPHONE 7, So I have another phone and fixed it with a replacement screen, I then moved the home button and front camera and sensor cables. After turning it on and off it kept sending me into reboot so i disconnected the cable and it perfectly started. I put it back it and checked for any problems and couldn’t find any, everything was moved correctly and I even checked multiple guides and ifixit videos and it was all right. I was wondering.. what should I do?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Most likely a damaged front camera flex assembly but I have seen a damaged home button flex show the same symptoms when both connected.

You need to disconnect the home button flex and with the front camera flex connected see if it boots. If it still boot-loops with the home button flex disconnected it is defiantly a faulty front flex assembly and will need replacing.

If it boots with the home button flex disconnected it is most likely a torn home button flex which will require another screen.

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

It was actually still suffering from a boot loop issue after the home button flex was disconnected. Which means I need to buy a replacement for front flex cable which I initially thought to do, thank you very much!!

- de

Agregar un comentario

Añadir tu respuesta

matthew einstein estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 45