Repara tus cosas Comunidad Tienda

Guías de reparación y desmontaje de relojes inteligentes diseñados por Apple.

Preguntas 980 Ver todo

Opciones

AppleWatch only displays logo intermittently after battery replacement

I replaced the battery on my Apple Watch following the instructions here:

Remplazo de la bateria del Apple Watch Series 1

Everything went fine, but when charging it for the first time:

  1. I don’t get the changing snake symbol
  2. The Apple logo will display for <1 sec and then stay off for about a minute.

I don’t think I tore any of the cables or shorted anything.

I am thinking it might be a defective battery. Has anyone had this issue and resolved it by replacing the battery with another new battery?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

My best friend had this issue and sent his series 1 to me for a new battery. Although I’ve tried two new batteries from different suppliers, it still did the same thing. I’m wondering if the software got corrupted or something. I would maybe try another supplier for the battery. I recommend mobile sentrix.

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

@hootonberg @michael_314

I'm dealing with this right now. I've received 3 batteries from iFixit and all have been defective. The voltages have been way too low (2.2V to 2.4V) to accept a charge or boot the watch. It should be closer to 3.7V-3.8V at rest even when fully depleted. I have a thread going here (Apple Watch S1, Still have a boot loop after battery replacement) and over at macrumors (https://forums.macrumors.com/threads/ser...)

- de

Agregar un comentario

Añadir tu respuesta

Michael Gagne estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 18

Todo El Tiempo: 731