Rep: 1
1
Hi Everyone,
After chancing a Display and battery on my iphone 7, the touchid / home botton not working at all.
Give to somebody more expert then me, he tell me that there is a damage on the socked of the TouchID pin.
I’m not and expert so I don’t know how to / and if it’s possibile to fix.
In attach the photo of the part.
Thank you
Es esta una buena pregunta?
Rep: 50.8mil
8
15
101
It’s hard to see if the connector is damaged from the photo you uploaded. What usually stops the home button functioning after removing and installing the screen on the iPhone 7 series is a tiny tear in the home button flex coming off the screen. The tear usually occurs at the 90 degree bend. You may need some magnification to check.
Fue útil esta respuesta?
The Cable and the home button works if apply into another phone...
As I said it’s hard to see from the photo. We would usually put it under a microscope to check. If we found a bent pin we would try and straighten it then test with multimeter. If we couldn’t fix it we would remove it and install a new connector which requires microsoldering.
@imicrosoldering Thank you for your suggest.
Maybe cost me more than buy an used iphone 7.
It is not a big job. Get some quotes first and see how much it will cost. Being the home button FPC it should be cheaper than purchasing another phone.
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 57
