Saltar al contenido principal

Guías e información de reparación para una variedad de tarjetas gráficas, también conocidas como tarjetas de video, adaptadores de gráficos o adaptadores de pantalla.

Preguntas 111 Ver todo

I sheared a resistor(?) off of the back of my 1060, can it be fixed?

Block Image

I have a Zotac gtx 1060 6 gb, and while i was swapping to a new case, i managed to knock a little black retangle, what i believe is a resistor, off of the card. Can it be fixed, or do i need to look for a replacement?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
3 comentarios

Suggest post a pic of the damaged board/component. Can you solder and is there room? If not, you’ll need to get new. Good luck!

- de

alex collins just like the aforementioned, post some pictures of what you got going on. Post it with your QUESTION

Agregar imágenes a una pregunta existente

- de

@oldturkey03 i have put a picture up, thanks for the heads up

- de

Agregar un comentario

2 Respuestas

Solución Elegida

alex collins looks like reference designator C6(8?)42 is the part. That is a capacitor not a resistor. Yo ugot plenty of room to solder and the solder pads look really good as well. Since there are no markings on the capacitor you will need a capacitance tester (some multimeter have it standard) and measure the capacitor to get a replacement. Most likely mouser.com or digikey.com would have it. If you do not have a capacitance meter try to get somebody that does repairs to check it for you. Electronics stores , Colleges, Trade Schools etc. will also be an option. If you cannot measure that cap measure the one in location C764. On a hunch, I bet they are the same value. Not a difficult job to fix this board.

Fue útil esta respuesta?

Puntuación 4
Agregar un comentario

Send a pic so i can find a replacement for you. Also you need to solder it back on! So when you go to the hardware store always get Rosin core solder With flux if possible. I also recommend you get 60/40 type that contains lead . and also you if you need to know how to solder try this video series.

https://www.youtube.com/watch?v=vIT4ra6M...


If possible buy a solder iron that has Temp Control + a grounding pin on the plug.


NOTE: Try buying a mask as soldering is toxic. But if your brave you can just hold your breath and be quick!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

alex collins estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 6

Todo El Tiempo: 354