Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Anunciado el 9 de septiembre de 2015, el iPad Mini 4 mantiene la potencia de un iPad Air 2 en un factor de forma más pequeño.

Preguntas 153 Ver todo

Red screen after screen replacement


So i’m have encounter a problem that I never seen on iPad mini 4, been doing these repairs for a couple of years but never seen it tho.

Did a screen replacement for a customer, everything went fine. But when i’m trying to start the iPad , straight after apple logo i’m getting a red screen. Then it just reboot itself. I have tryd with several differents screens and checked HB flex cables. I also checked the surounded area around the display connectors on motherboard to see if I have touch anything these. But cant see any damage at all…

This iPad was working fine before the repair and it doesn’t work anymore with the original screen or the new ones. Just getting red screen all the time..

So my question is if someone have encouter this before and know what I should look after? I have a friend of mine who can do some micro solderning and I have some knowledge about it but cant really do it. But I’m guessing its a motherboard fault.

And yes I did remove battery before removing screen etc.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

This happened to me a few times, it could be the logic board or the home button flex.

Try booting without HB installed, if red screen persists then you are certain it’s logic board related.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Andreas J estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 51