Rep: 25
1
1
I can’t get the screw out to clean the boiler outlet. It seems to be welded in. Water won’t pump through. Do I have to throw the whole machine away because the screw won’t come out?
Here are the pictures of the screw I can’t get out and the boiler holder (holds the coffee filter).
Es esta una buena pregunta?
Rep: 784.3mil
1.1mil
894
2.3mil
jwsacco it is not welded in. I think it is just hard to get a good grip on it. Use a phillips head socket and a ratchet. Place the socket into the screwhead and use a small hammer to tap the bottom of the socket thus loosening the screw a bit. The use the ratchet on the socket to remove the screw.
Check the first 45 sec off this video
Fue útil esta respuesta?
Ultimas 24 horas: 4
Ultimos 7 días: 18
Ultimos 30 días: 55
Todo El Tiempo: 2,330
2 comentarios
jwsacco post some good pictures of what you are up against. That way we can see what you see and hopefully help you out.Agregar imágenes a una pregunta existente
- de oldturkey03
I can't get the screw out. It's stuck fast. I have tried WD40. Any advice would be appreciated.
- de josie130262