I changed a new hard drive
Western Digital Scorpio Blue 80GB 8MB 5400rpm 2.5" to my Powerbook g4.
I then tried to install Leopard from installation disk but it doesn't seem to work.
Install starts if I keep "alt" button on when booting.
Then comes
See fotos from
www.raisanloma.kuvat.fi
Then the cd driver starts to make a crackling noise which don't stop until I shut down power.
What to do
Es esta una buena pregunta?
Rep: 20.7mil
86
89
33
As far as I know that machine accepts Leopard, so I would venture to guess that your superdrive is to blame here. If you have a USB Flash drive, try creating an image of the install disk and install through USB. Not sure if this machine can boot from USB, but it's worth a shot. You can also try to use an external CD/DVD drive if you have one available. Just took a look at the pics in your link and I have to ask: has this machine displayed this behavior before? Why did you change the previous HD?
Fue útil esta respuesta?
+ Target Mode
Yes this machine has displayed this behavior before. After I couldnt open it at all. How to boot from USB?
Ultimas 24 horas: 1
Ultimos 7 días: 3
Ultimos 30 días: 4
Todo El Tiempo: 662
2 comentarios
Yes this machine has displayed this behavior before. After I couldnt open it at all.
How to boot from USB?
- de Samuel wasy
Your computer is a PPC and won't boot from USB. You need to boot from Firewire.
- de rj713