Saltar al contenido principal

Lanzamiento el 21 de septiembre de 2018. Modelos A1920, A2097, A2098, A2100. Disponible como GSM o CDMA/eSIM o nano-SIM/64, 256, o 512 GB/ Plateado, Dorado o Gris Espacial (Pronunciado "iPhone 10 S.")

Preguntas 398 Ver todo

Why is there no incoming and outgoing audio in calls after a repair?

I replaced the screen on an iPhone XS and now the audio does not work on calls. Incoming and outgoing, people cannot hear me and I cannot hear them. Face ID still works and the microphone still works (voice recorder works) and so does the earspeaker (I can hear it when playing anything else.) One last thing, when I place it on speaker it immediately takes it out and still, nothing can be heard.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Respuesta Más Útil

If it suffered a decent drop I would suspect one of the solder balls on the interposer board that is connected to baseband has failed in some way. I think you might have to split the board and check. If the pads look all right the baseband ic would be the next culprit.

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

Same here,

I hope you sorted it out, but I am testing an iPhone XS with the same issue, and if I press and hold the Face ID (and earpiece) cable it works on phonecalls, as soon as I realease the finger from the connector it stops working.


What could it be?

I’ve already changed the earpiece, but with no changes.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Noel Lopez estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 135