Repara tus cosas Comunidad Tienda

iMac Intel 27 "EMC 2309 (Finales de 2009, Core 2 Duo 3.06 o 3.33 GHz) ID iMac10,1, EMC 2374 (Finales de 2009, Core i5 2.66 GHz o Core i7 2.8 GHz) ID iMac11,1

Preguntas 467 Ver todo

Opciones

Replacing iMac Case - any step by step guides?

Hi guys,

I’ve bought a 27” iMac (A1312) with a damaged case for a good price.

Managed to get a spare empty case in excellent condition off eBay and want to change the complete internals over to the new case. At the same time i’ll replace the HDD with a OWC SSD and i’ve also purchased an i7 quad core processor to replace the i5 currently in there.

All going well, this should be a great machine to keep me going for a year or two.

I’ve looked at the teardown guide on here, which gives me more or less all the main bits that come out, just wondering if anyone has been through the process and can warn me of anything I need to watch out for, or if there is a proper step by step guide to follow, just so I do everything correctly (and make it a lot easier to follow with so many screws and cables!) .

I’ve followed many excellent fixit guides in the past for HDD upgrades on my mac minis.

Any help or advice much appreciated!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

Thanks for the replies guys.

I appreciate my request is a bit niche - probably not worth doing a guide for!!

I’ll take my time and document every step which I can hopefully retrace, along with using both guides mentioned above as I go.

Thanks again.

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Take pictures as you go. I use old empty pill bottles for the screws on each section of a teardown and label them. There is not a guide for the logic board (which would be the most complete) on your machine but you may want to take a look at the teardown:

iMac Intel 27" EMC 2309 and 2374 Teardown

Fue útil esta respuesta?

Sí No
Puntuación 3
Agregar un comentario

Opciones

Sorry we don’t have any guides that get that deep. Just take your time. As you didn’t tell us how stripped the case is you may have some of the parts still attached (part from a dead system?)

Do keep in mind this series SATA ports are only SATA II (3.0 GB/s) so make sure you get the correct SSD from OWC and you’ll need the in-line thermal sensor as well. Review this guide iMac Intel 27" EMC 2309 and 2374 cambio de disco duro iFixit also sells a upgrade kit with all of the needed pieces & tools.

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Añadir tu respuesta

Ryan O'Neill estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 258