Repara tus cosas Comunidad Tienda

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2690 Ver todo

Opciones

Using replacement battery kit on phone identified as water damaged

I’m interested in using iFixit’s battery replacement kit for my iPhone 6s. When I took it to Best Buy for the $29 deal last year, they refused to do the service based on the water damage indicator showing pink (I dropped it in the river for a couple of seconds about 1.5 years ago).

I’ve never had any issues stemming from the water damage (that I know of), but my battery could use replacement. My question is whether or not it’s a good idea to use this kit to do it myself. I’ve seen other posts that recommend doing a good cleaning using isopropyl alcohol before battery replacement. Given that I’m completely new to any phone repair, is it worth buying the kit? Any risk of me catching my phone on fire? Battery health maximum capacity is at 83%. Thanks for any advice.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Depends on if you see corrosion e.g white marks inside the phone on any connector or liquid residue behind the screen or board.

Usually it's okay if the sticker just went red but with no signs of liquid inside.

It is worth buying the replacement kit, a battery replacement is fairly cheap and doesn't take long to do while following the iFixit guide.

Fue útil esta respuesta?

Sí No
Puntuación 3

3 comentarios:

Thanks for your advice. I assume I will only find the white marks once I actually open up the phone, correct? I'll give it a shot.

- de

Yeah, should be fine. If you see red marks do a quick inspection of the inside of the phone, no need to remove logic board if it looks fairly clean.

- de

Everything went smoothly and no additional corrosion was found inside the phone. Thanks again for your help!

- de

Agregar un comentario

Opciones

When conducting this repair, ensure that you utilize some heat to loosen the adhesive for the battery. If the battery is punctured during removal, it is highly likely to catch fire. You can utilize 91% alcohol to fight some corrosion and to eat away at the adhesive. Recommend using plastic tools only to lift battery out and add alcohol as you gain space to get through the adhesive. Have fun and use caution. :-)

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Thanks Jonathan, I appreciate the additional information about removing the battery. I found a friend who has done a few of these repairs to hold my hand during the process.

- de

Agregar un comentario

Añadir tu respuesta

Matt Gregory estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 77