Saltar al contenido principal

Lanzado el 22 de septiembre de 2017. Modelo A1864, A1897. Disponible como GSM o CDMA / 64 o 256 GB / oro, plata y gris espacio.

Preguntas 679 Ver todo

After replacing housing apple pay not working

Hy,i have compleately reasembeled iphone 8 plus

all looks to be working,wifi bluetoot wireles charging all works. But apple pay is not working. Any ideas how could i fix it.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Reemplazo del ensamblaje del conector Lightning en el iPhone 8 Plus

Check step 51, there is a thin flex cable going around the top right perimeter of the rear housing, around the rear camera position, that is the Apple Pay antenna. It needs to be screwed in to the rear housing and a screw post on the logic board.

Also all the small clips, brackets, screw holes and contact points on the rear housing may serve RF purposes, make sure they are exactly prepared and assembled like factory condition.

Fue útil esta respuesta?

Puntuación 3

1 comentario:

Does the iPhone use the NFC for automatic setup? i mean when you bring an old device close to a new one and it automatically sets it up using the old device settings

- de

Agregar un comentario

Añadir tu respuesta

Justas Gurauskas estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 7

Todo El Tiempo: 1,798