Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

Preguntas 1468 Ver todo

Apple Hardware Test Failure Code: Help

Hello Everyone,

I was just playing around with my macbook 4,1 and decided to do Apple Hardware Test. Which resulted in

failure code: 4SNS/1/40000001: VG0C-0.070

I did some research and seem to indicate a sensor failure on the logic board. Though I have not had any no problems with this laptop for the last 8months(2nd owner) I was wondering if anyone could shed some more light on this error code and if I should be concerned

Thanks

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 3

Comentarios:

good job. Thanks for sharing.

por

Agregar un comentario

¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

4 Respuestas

Solución Elegida

Apple doesn't tell the peons what those codes mean. But if you would like to spend about $47.50 they will tell you. Just call 1-800-SOS-APPLE. But my opinion is, "if it ain't broke, don't fix it".

Fue útil esta respuesta?

Calificación 6
Agregar un comentario

You could try running Techtool Pro from Micromat.

I used to be Mac Certified - and I couldn't get error code info ?? !

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Run the extended version of the Apple Hardware Test. Sometimes you will get an error if you run the quick version, and it may be something of a false positive. Some have found doing an SMC reset 3 or 4X can eliminate the error (note: a work around not a fix). If it is indeed a logic board error it points to a sensor(s) failing, VPOR might be VGC(VPU) related. You'll probably need a new logic board, AFAIK sensors as well as the VGC are soldered to the logic board which pretty much makes them non-DIY repairs, as soldering on logic boards are not for amateurs.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Clean the fans, increase the air flow around the computer. I agree with previous post. he suggested reset of the SMC 3 - 4 times. also try another AHT cdrom. What is the memory setup in your C2D? are the ram chips installed in a pair?

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Jamie estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 63

Todo El Tiempo: 2,239